Application of LED Aluminum on Stairs

The application of LED aluminum profile in stairs is roughly as follows:

1.lighting at the bottom end of the side wall

The use of lighting at the bottom end of the side wall

is very common. It is usually divided into exposed installation and concealed installation.

Exposed installation is to install LED aluminum profiles at the bottom of the side wall. In this way, the linear light can play the role of extending the space.

Concealed installation is to leave a groove in advance at the bottom of the staircase step in advance, and install the aluminum material in the reserved groove. In this way, the light is not visible, and the soft light can weaken the many and hard lines of the stairs, making the space more warm

2.Lighting under the handrails

Concealed with an entire strip of light at the lower end of the handrail allows maximum light to shine on each staircase step， and the soft lighting can bring a visual beauty of light washing the wall, presenting a comfortable and harmonious lighting environment.

3.Lighting under the stairs

Embed the aluminum profile under the staircase step to increase the layering of the space. This applies to almost all decoration styles. Suitable for almost all decoration styles. Both minimalist and rustic styles are applicable.

Here are two commonly used stair lighting methods

1.concealed installation

(1)45° outward light

The aluminum is installed inside the reserved groove. The light output area of this installation method is the largest of the three installation methods. If the material of the staircase is smooth marble or smooth solid wood, it is easy to form reflections and cause dazzle.

(2) Light straight down

The aluminum is installed vertically above the reserved groove, making installation simple and convenient. The light output area of this installation method is at the general level of these three installation methods.

However, if the material of the stairs is smooth wooden floor or marble, it is easy to produce reflections and form glare.

(3) 45° inward light

The aluminum is installed in the reserved groove（As shown in the image）, because the light is inward and then refracted out, the light is soft, and the light output area of this installation method is the smallest of the three installation methods.

1.Exposed installation

(1) The stair aluminum PXG-516-2 meets the lighting requirements of stairs while its smooth metal surface can also neutralize the visual heaviness of wooden or marble steps，It makes the space lighter.

(2) The surface of PXG-516 is treated with anti-slip, which can not only meet the direct lighting needs of stairs, but also play a role in safety and anti-slip. The surface of PXG-516-1 can be installed with silicone anti-slip strips, which has better anti-slip effect.

4.Segmented lighting on side walls

Regularly concealing line lights on the wall can not only extend the effect of space, but also play a decorative role.

Choosing a line light for the lighting of stairs is definitely a wise choice.